上海交通大学材料改性与数值模拟研究所

Label

研究成果

奖项

著作

文章

专利

开发软件

首页 > 研究成果 > 文章 > 2020年

淬火-配分-回火钢干滑动摩擦磨损性能的研究张霆威，杨继兰，郭正洪，顾剑锋，刘庆冬热处理， 2020，5：15-21
低压转子加热过程的流固多场耦合模拟王婧，张永强，王皓，顾剑锋材料热处理学报，2020,12,119-128
淬火-配分-回火钢在模拟海水环境中的腐蚀性能研究翟思昕，杨幸运，杨继兰，顾剑锋中国腐蚀与防护学报， 2020，5： 398-408
Unusual ordered phases with long periodic stacking structures in an additively manufactured TiAl alloy [J] Xinyu Zhang , Chuanwei Li, Qing Wang , Mengyao Zheng , Zhenhua Ye, Jianfeng Gu. Materials Research Letters, 2020, 8: 454–461.
Anisotropic tensile behavior of Ti-47Al-2Cr-2Nb alloy fabricated by direct laser deposition [J] Xinyu Zhang, Chuanwei Li, Mengyao Zheng, Zhenhua Ye, Xudong Yang, Jianfeng Gu. Additive manufacturing, 2020,32: 101087.
Microstructure and mechanical properties of a low-carbon HDQ&P steel[J] Yufei Lu, Jilan Yang, Jun Xu, Zhenghong Guo, Jianfeng Gu. Heat Treatment and Surface Engineering,* 2020, 1:87-96.
Visualization of microstructural factors resisting the crack propagation in mesosegregated high-strength low-alloy steel [J]. Shuxia Wang, Chuanwei Li, Lizhan Han, Haozhang Zhong, Jianfeng Gu Journal of materials science & technology, 2020, 42: 75-84.
Effect of cobalt-based coating microstructure on the thermal fatigue performance of AISI H13 hot work die steel [J]. Xudong Yang, Chuanwei Li, Ziyang Zhang, Xinyu Zhang, Jianfeng Gu. Applied surface science, 2020, 521: 146360.
Improved impact toughness by multi-step heat treatment in a 1400 MPa low carbon precipitation-strengthened steel [J]. Wei Hou, Qingdong Liu, Jianfeng Gu. Materials science & engineering. A, 2020, 797: 140077.
Nano-sized austenite and Cu precipitates formed by using intercritical tempering plus tempering and their effect on the mechanical property in a low carbon Cu bearing 7 Ni steel [J]. Wei Hou, Qingdong Liu, Jianfeng Gu Materials science & engineering. A, 2020, 780 : 139186.
In-situ deformation characterization of mesosegregated high-strength low-alloy steel [J]. Shuxia Wang, Chuanwei Li, Mengyao Zheng, Zhenhua Ye, Haozhang Zhong, Daming Tong, Lizhan Han, Jianfeng Gu. Materials characterization, 2020, 169 : 110627.
Optimization scheme of the orientation relationship from crystallographic statistics of variants and its application to lath martensite [J]. Duanjun Sun, Chuanwei Li, Xuan Xue, Yi Liu, Zhenghong Guo, Jianfeng Gu Materials & design,* 2020, 195 : 109022.
Effect of Cyclic Intercritical Tempering on the Microstructure and Mechanical Properties of a Low-Carbon Cu-Bearing 7Ni Steel [J]. Wei Hou, Qingdong Liu, Haiming Wen, Jianfeng Gu Metallurgical and Materials Transactions A, 2020, 51(8) : 3981-3995
Alternative-band microstructure and LPSO phase in TiAl alloy produced by direct laser deposition [J]. Xinyu Zhang, Chuanwei Li, Mengyao Zheng, Haozhang Zhong, Jianfeng Gu Materials characterization, 2020, 164 : 110315.
Microstructure Formation and Tailoring of the Intermetallic TiAl Alloy Produced by Direct Laser Deposition [J]. Xinyu Zhang, Chuanwei Li, Haozhang Zhong, Xudong Yang, Jianfeng Gu Metallurgical and Materials Transactions A, 2020, 51(1) : 82-87

淬火-配分-回火钢干滑动摩擦磨损性能的研究

张霆威，杨继兰，郭正洪，顾剑锋，刘庆冬

热处理， 2020，5：15-21

低压转子加热过程的流固多场耦合模拟

王婧，张永强，王皓，顾剑锋

材料热处理学报，2020,12,119-128

淬火-配分-回火钢在模拟海水环境中的腐蚀性能研究

翟思昕，杨幸运，杨继兰，顾剑锋

中国腐蚀与防护学报， 2020，5： 398-408

Unusual ordered phases with long periodic stacking structures in an additively manufactured TiAl alloy [J]

Xinyu Zhang , Chuanwei Li*, Qing Wang , Mengyao Zheng , Zhenhua Ye, Jianfeng Gu*.

Materials Research Letters, 2020, 8: 454–461.